Bộ thiết bị Cisco SX80 P60 Camera cung cấp một nền tảng hội nghị mạnh mẽ và linh hoạt để tạo ra trải nghiệm cộng tác video đỉnh cao. SX80 được xây dựng với ý tưởng tích hợp để hỗ trợ tính linh hoạt và sáng tạo cho các phòng cộng tác hội nghị truyền hình tùy chỉnh làm hài lòng khách hàng. Đến từ thương hiệu Cisco, SX80 P60 Camera phù hợp cho các phòng họp lớn, phòng hội trường tích hợp hệ thống Audio/video/ control….

Bộ thiết bị sẽ bao gồm:
- 1x Cisco SX80 Codec
- 1x Precision 60 Camera
- 1x Touch 10
*Trải nghiệm hội nghị chất lượng cao với độ phân giải FullHD 1080p60 và chia sẻ dữ liệu với chất lượng 1080p30. Đặc biệt, Cisco SX80 Codec là thiết bị đầu tiên hỗ trợ chuẩn nén H.265, giúp tiết kiệm băng thông mà vẫn giữ được chất lượng hình ảnh tuyệt vời. Camera P60: full HD, PTZ 10X zoom quang học, 2x zoom số ( tổng 20X), góc mở 80 độ. Thực hiện và quản lý các cuộc gọi video, chia sẻ nội dung và truy cập các tính năng nâng cao – tất cả chỉ bằng một cú chạm ngón tay đơn giản với bảng điều khiển Touch 10.
Với Cisco SX80 P60 Camera , bạn sẽ trải nghiệm cuộc họp trực tuyến chất lượng cao và đáng tin cậy!
Đặc điểm Bộ thiết bị họp trực tuyến Cisco SX80 P60 camera
1/ Cisco SX80 Codec
- Chuẩn video H264, H265, full HD 1080p.
- Giao thức H323/SIP.
- Audio input: 8 microphone (euroblock 3.5mm), 2 stereo line in form PC/4 GPIO pin.
- Audio output: 3 stereo/mono (euroblock 3.5 mm).
- Video input: 3 camera HDMI / 1 DVI / 1 Analog BNC.
- Video output: 2 HDMI dual monitor / 1 DVI for Content.
- Hỗ trợ đầy đủ chức năng APIs.
- Hỗ trợ nâng cấp MCU 5 điểm.

2/ Cisco P60 Camera
- Độ phân giải: 1920 x 1080 @60 fps.
- Zoom quang: 10x.
- Zoom số: 2x.
- Zoom tổng: 20x.
- Góc quay quét: Pan range: +/-100 º, Tilt range: +/-20º.
- Góc quan sát: Horizontal FoV: 80º, Vertical FoV: 48.8º.
- Khoảng cách lấy nét: Trên 1 mét.
- Camera control: Ethernet.
- Video interfaces: HDMI 1.4 & 3G-SDI.
- Network interfaces: One LAN/Ethernet (RJ-45) 10/100 Mbit.
- Nguồn điện: 12V/3A.

3/ Bảng điều khiển cảm ứng Cisco Touch 10
- Kích thước màn hình cảm ứng: 10 inch.
- Sử dụng với các thiết bị đầu cuối Cisco dòng Cisco MX Series, SX Series, IX Series, Cisco Spark Room Kit, Room Kit Plus, Room 55 and Room 70.
- Độ phân giải màn hình LCD: 1280 x 800.
- Giao tiếp: TCP/IP.
- Hỗ trợ bộ nhớ với dung lượng lên tới 4 GB.
- Hỗ trợ cấp nguồn qua mạng POE (Power over Ethernet).
- Hỗ trợ đầy đủ chức năng APIs.
- Dễ dàng sử dụng, giao diện đồ họa phẳng.

Thông số kỹ thuật Cisco SX80 P60 camera
| Model | CTS-SX80-IP60-K9 |
| Software compatibility | Software Version TC 7.1 or later |
| Cisco Collaboration Endpoint Software 8.0 or later | |
| Bandwidth | H.323/SIP up to 6 Mbps point-to-point |
| Up to 10 Mbps total MultiSite bandwidth | |
| Minimum bandwidth for resolution/frame rate (H.264) | 720p30 from 768 kbps |
| 720p60 from 1152 kbps | |
| 1080p30 from 1472 kbps | |
| 1080p60 from 2560 kbps | |
| Video standards | H.261, H.263, H.263+, H.264 and H.265 |
| (SIP only for H.265) | |
| Video features | Advanced screen layouts |
| Custom video layouts | |
| Local auto layout | |
| Video inputs (five inputs) | Three HDMI Inputs |
| One DVI-I Input | |
| Analog (VGA or YPbPr) | |
| Digital (DVI-D) | |
| One Composite/S-Video Input (BNC Connectors): PAL/NTSC | |
| Extended Display Identification Data (EDID) | |
| Video outputs (three outputs) | Two HDMI Outputs and one DVI-I Output |
| VESA Monitor Power Management | |
| Extended Display Identification Data (EDID) | |
| Audio standards | G.711, G.722, G.722.1, G.728, G.729AB, 64 kbps and 128 kbps MPEG4 AAC-LD mono and stereo, OPUS |
| Audio features | CD-quality 20 kHz mono and stereo |
| Eight separate acoustic echo cancellers | |
| Eight-port audio mixer | |
| Eight assignable equalizers | |
| Automatic Gain Control (AGC) | |
| Automatic noise reduction | |
| Active lip synchronization | |
| Audio inputs (fifteen inputs) | Eight microphones, 48V phantom powered, Euroblock connector, each with separate echo cancellers and noise reduction; all microphones can be set for balanced line level |
| Four balanced line level inputs, Euroblock connector | |
| Three HDMI, digital: stereo PC/DVD input | |
| Audio outputs (eight outputs) | Six balanced line level outputs, Euroblock connector |
| Two HDMI outputs | |
| Dual stream | H.239 (H.323) dual stream |
| BFCP (SIP) dual stream | |
| Support for resolutions up to 1080p30, and independent of main stream resolution | |
| Multipoint support | Five way embedded SIP/H.323 multipoint (reference MultiSite) |
| Cisco ad-hoc conferencing (requires CUCM, Cisco TelePresence Server and Conductor) | |
| Cisco Conferencing Active Control | |
| Switched Conferencing (SVC)3 | |
| MultiSite features (embedded multipoint) | Five way 720p30, three way and four way 1080p30 MultiSite |
| Full individual audio and video transcoding | |
| Individual layouts in MultiSite continuous presence | |
| H.323/SIP/VoIP in the same conference | |
| Support for Presentation (H.239/BFCP) from any participant at resolutions up to 1080p15 | |
| Best Impression (Automatic continuous presence layouts) | |
| H.264, encryption, and dual stream from any site | |
| Additional telephone call (no license required) | |
| IP downspeeding | |
| Dial in and dial out | |
| Conference rates up to 10 Mbps | |
| Protocols | H.323 |
| SIP | |
| Dual call stack support (SIP and H.323) | |
| ISDN (requires Cisco ISDN Link) | |
| Embedded encryption | H.323/SIP point-to-point |
| Standards-based: H.235 v3 and Advanced Encryption Standard (AES) | |
| Automatic key generation and exchange | |
| Supported in dual stream | |
| IP network features | DNS lookup for service configuration |
| Differentiated Services (QoS) | |
| IP adaptive bandwidth management (including flow control) | |
| Auto gatekeeper discovery | |
| Dynamic playout and lip-sync buffering | |
| H.245 DTMF tones in H.323 | |
| Date and Time support via NTP | |
| Packet Loss based downspeeding | |
| URI Dialing | |
| TCP/IP | |
| DHCP | |
| 802.1x Network authentication | |
| 802.1Q Virtual LAN | |
| 802.1p (QoS and Class of Service [CoS]) | |
| ClearPath | |
| RFC 4733 DTMF tones in SIP | |
| Call control | Cisco Unified Communications Manager (CUCM) |
| Native registration with CUCM | |
| Requires CUCM Version 8.6(2) or later with device pack for SX80 | |
| Basic CUCM provisioning | |
| Firmware upgrade from CUCM | |
| Cisco Discovery Protocol and DHCP option 150 support | |
| Basic telephony features such as hold, resume, transfer, and corporate directory lookup | |
| Cisco Video Communication Server (VCS) | |
| Native registration with VCS | |
| Cisco Webex | |
| Third-party H.323 Gatekeepers and standards-based SIP proxies | |
| IPv6 network support | Single call stack support for both H323 and SIP |
| Dual-stack IPv4 and IPv6 for DHCP, Secure Shell (SSH), HTTP, Secure HTTP (HTTPS), DNS, and Differentiated Services (DiffServ) | |
| Support for both static and autoconfiguration (stateless address auto configuration) | |
| Network interfaces | One LAN/Ethernet (RJ-45) 10/100/1000 Mbit |
| Two LAN/Ethernet (RJ-45) interfaces to be used for Cisco peripherals | |
| Power | Auto-sensing power supply |
| 100-120/200-240 VAC, 50/60 Hz | |
| 170 watt maximum for codec and main camera | |
| Operating temperature and humidity | 0 to 40° |
| 10 to 90% Relative Humidity (RH) | |
| Storage and transport temperature | -20° C to 60° C (-4° F to 140° F) at RH 10-90% (non-condensing) |
| Dimensions | Length: 17.4 in |
| Height: 1.7 in | |
| Depth: 12.2 in | |
| Weight: 8.05 lbs |























2 đánh giá cho Bộ thiết bị họp trực tuyến Cisco SX80-P60 Camera
Chưa có đánh giá nào.